MALAYSIA
PRISMA BYTES SDN BHD (506560-H)Unit 17-03 and 17-04,
Tower 1, Faber Towers,
Jalan Desa Bahagia, Taman Desa,
58100 Kuala Lumpur
Tel: +60379846781
Sabre utilises laser light transmitted along a fibre optic cable and analysis of the return pattern. Unlike infrared, copper or coaxial based detection systems, Sabre products are not susceptible to electrical or weather-related interference and are able to provide uninterrupted monitoring. The system is suitable for hazardous industrial locations where there may be a fire or explosion risk as well as harsh environments with extreme temperature ranges.
SABREFONIC is a state of the art Perimeter Intrusion Detection system using Fiber Optic Based sensing cable - designed mainly for outdoor environments at the perimeter fence limits or around sensitive, high-risk and secure areas to protect the facilities.
The SABREFONIC FIDS range includes an advanced Signal processor Unit , Sabre series fibre optic sensor cables or fiber Optic based buried pressure sensors. SABREFONIC relies on fibre optic technology to monitor for vibration and compression caused by attempts to climb, crawl under or cut through a perimeter fence. Should an intrusion occur or an attempt at intrusion be detected, the Sabrefonic system will detect this event and generate an alarm for pick-up via a remote monitoring station. This can be a third party PSIM / AHS system or a Prisma Bytes Integrated Alarm Management System
SABREFONIC is able to detect intrusion on Fencing and walls or buried underground and can be deployed in various site environments such as ;
Perimeter intrusion detection systems are usually installed in an outdoor environment at the perimeter limits or around sensitive, high-risk areas. The sensors detect, deter, and delay intruders. A PIDS installation provides critical time for security teams to respond to any intrusion. Triggered alarms can be located to zoned areas and CCTV used to access the overall risk from the intrusion.
Prisma Bytes manufactures fibre optic perimeter intrusion detectors that are easy to install, sensitive to intrusion in difficult environments, immune to radio or electrical interference and safe in operation. The Sabre product range caters for fence and wall mounted applications, buried systems and flexible mesh which is suitable for the protection of sensitive storage areas.
The SABREFONIC series is a range of industry leading fibre optic-based perimeter intrusion detection systems for applications from fence protection to watercourse security. At the heart of each product is an advanced technology Signal processor connected to an application suitable fibre optic sensor cable. The Signal processor can be supplied in an enclosure with a power supply and battery backup with the required IP ratings.
Sabrefonic continuously monitors for vibration, flexing and compression by analysing laser light returned to a sensor. Pattern changes are analysed with alarms triggered against pre-set conditions for cut and climb events. Automatic environmental compensation algorithms ensure the highest probability of detection whilst ensuring a minimum of nuisance alarms from natural causes
The Sabre communications interface is based on BACnet/IP technology and integrates with our EntroWatch access control software. Sabrefonic alarms can be displayed in real time in the backend software with the MAP /GUI software, alongside video images from an integrated security surveillance package.
It is a long established fact that a reader will be distracted by the readable content..
A buried pressor sensor suitable for covert applications under grass, gravel. Sabre Line is undetectable (using metal detectors) and can be buried in a wide range of ground and humidity conditions. The system can be easily installed in zones with various lengths, widths and shapes.
Consists of a specially prepared mild-steel tape, which is pre-galvanised and polyester coated. The fibre optic cable is laid into the tape, which is then sealed. SabreTape is available with an aggressive (barbed) or non-aggressive finish and can be installed as a complete fence or as a collapsible, anti-climb outrigger on an existing installation.
Consists of a specially prepared mild-steel tape, which is pre-galvanised and polyester coated. The fibre optic cable is laid into the tape, which is then sealed. SabreTape is available with an aggressive (barbed) or non-aggressive finish and can be installed as a complete fence or as a collapsible, anti-climb outrigger on an existing installation.